Axis and Securitas turn up the heat with thermal cameras
Thermal cameras are the perfect tool for detecting people and objects in dark scenes, ensuring 24/7 surveillance in difficult, low-light scenarios. Generating far fewer false alarms and with no need for extra lighting, the technology performs impeccably in heavily vegetated areas, during heavy snowfall, or even through dense fog. Better yet, the camera is effective at distances of up to 200 meters.
We spoke to Jonas Bergström, Business Development Manager at Securitas, an Axis partner, who said: “We primarily use thermal cameras in perimeter protection installations. An intelligent video application is integrated into the cameras and forms a virtual fence. If anybody or anything crosses this virtual line then an alarm call is sent to our security operation centre (SOC). We estimate that the ratio of false alarms generated by intelligent video analysis in a thermal camera in relation to an optical camera is approximately 1 in 10. By keeping down the number of alarm calls per camera, each operator can handle more alarm events within a certain time frame. The result is major savings.”
What is the single greatest advantage of thermal cameras compared to optical cameras?
The absolute greatest advantage for us is that thermal cameras result in significantly fewer false alarms. This means our operators in the security operation center do not need to evaluate as many incoming alarm calls and therefore become significantly more time-efficient.
For what installation scenarios are the thermal camera models most suited?
We primarily use thermal cameras in perimeter protection installations. An intelligent video application is integrated into the cameras and forms a virtual fence. If anybody or anything crosses this virtual line then an alarm call is sent to our security operation center (SOC).
What have thermal cameras contributed in terms of savings for Securitas with the reduced number of alarm calls?
Securitas always aims to minimize the number of false alarms. A minimum number of false alarms means that the operators can be more efficient when authentic alarm calls come in. In extreme cases, too many false alarms can affect an operator’s attention and ability to identify authentic alarm calls.
We estimate that the ratio of false alarms generated by intelligent video analysis in a thermal camera in relation to an optical camera is approximately 1 in 10. By keeping down the number of alarm calls per camera, each operator can handle more alarm events within a certain time frame. The result is major savings.
Do you have an example of an installation where thermal cameras have been of great benefit and resulted in different types of savings for both the end customer and yourselves?
For a very large number of our customers, the implementation of thermal cameras, with intelligent video analysis connected to our security operation center (SOC), has resulted in major savings. The result has been reduced vandalism, interrupted and halted burglary attempts, reduced number of emergency call-outs from security guards and reduced use of operator time.
Why have you chosen to only use thermal cameras for perimeter monitoring?
The number of alarm calls generated is significantly lower than when using optical cameras.
Thermal cameras do not need extra lighting to be installed.
Thermal cameras are not as sensitive to different weather conditions, such as snow, rain, fog, etc.
We can cover a larger area with a smaller number of cameras.
With thermal cameras we can detect movement in areas of vegetation. In this environment we would have greater difficulty in creating enough contrast in the image to generate an alarm.
At what distance from the camera can you detect people with a high degree of certainty?
It all depends on the camera model used, with regard to the focal length of the lens. At up to 200 meters, it is normally no problem to detect and generate an alarm for people or objects moving in the image.
Based on your experience, are there any weather conditions that are particularly tough for thermal cameras?
Dense fog, very heavy snowfall and certain reflections from puddles of water may cause problems, even for a thermal camera. Our experience is that thermal cameras work considerably better than optical cameras in unfavorable weather conditions.
Are there any other conditions that make things difficult for thermal cameras?
Yes, vibration caused by an unstable mounting surface or a wind-sensitive mast is always a problem when working with alarms triggered based on intelligent video analysis. This primarily applies to long distances, because here even small vibration has a significant effect on the camera. However, Axis thermal cameras have built-in electronic image stabilization (EIS) that helps in these conditions.
You may also encounter problems even when the surroundings or backgrounds are the same temperature as an object in the image. This happens because a thermal camera cannot distinguish an object from its surroundings.
Exactly as with optical cameras, its surrounding environment affects the thermal camera. In general, the point is that a thermal camera is less affected by external factors than an optical camera.
PROSecureNewsonline is part of
GMS Business Communications - Digital Publishing Portfolio
Disclaimer & Copyright All rights reserverd
No part may be reproduced without the prior written permission of the Publisher. Whilst every care is taken, prices and details are subject to change and the publisher can take no responsiblity for omissions or errors. No responsibilty is taken for unsolicited submissions or the return of submitted items. The Publisher gives no guarantee of actual publication date.
Tel: 01548 521862